SmartBank PRO Split Charge System 200/12/2 SRCS

SmartBank PRO 200/12/2 is the most advanced stand-alone split charging device available in the market. It uses the industry-accepted "best method" split charging that does not cause any voltage drop, does not force feed batteries, and permits sharing of battery capacity between banks. This feature helps to extend battery run-times to the maximum possible limit.

SmartBank PRO is protected from transient loads by on board DSP (Digital Signal Processing). It also has built-in data-logging which allows you to track system performance and tune it to maximize charge efficiency.

SmartBank PRO can be batch programmed via a PC, which is perfect for fitting across large fleets. The optional PC Interface kits come with free software, a serial to USB converter, an adaptor cable and enables:
- programming of advanced features & alarms,
- data logging, - real-time monitoring,
- and system diagnosis.

• Model based battery monitor proven to be much more accurate than basic Ah counting battery monitors.
• Does not run out of synchronization giving dependable soC% information at all times.
• Provides critical information displaying voltage and soC% for auxiliary battery, and voltage of engine start battery.
• Alarm functions including high/low voltage and soC% alarms.
• Alarm contacts for auto start/stop of generators, load shedding, external alarms etc.
• Quick installation using two wires across the positive (+) and negative (-) of a 12v battery bank, and an optional third wire for second battery monitoring.
• Supplied with fitting kit including fuses and fuse holders.