Van Roof Vent Fan - Turbo 2 (68mm high)

This is a superior quality van roof vent fan made by G&C Systems in Holland. There are many other far inferior van roof fans available elsewhere.

• Easy to fit van roof vent
• Genuine G&C Systems made van roof vent
• Complete with with interior grill & shutter
• Wind powered van ventilation fan
• Low noise level
• Requires 128mm roof cut out
• Suits roof thickness of 1mm to 21mm
• Made from hardwearing ABS plastic

How to fit the van roof vent
Fitting instructions are included in the box
1. Make a 120mm diameter opening in the roof.
2. Remove any sharp edges and seal the inner edge to prevent corrosion.
3. Position the ventilator onto the cutout (roof top)(ensure the arrow marked on the roof vent is pointing towards the front of the vehicle).
4. Make sure the ventilator is mounted on a flat area on the roof.
5. Select the correct bolt size required to suit the roof thickness. Use M8 x 16 for roof thickness of 1-6mm, or M8 x 20 for roof thickness of 7-11mm (make sure to fit o-ring around the bolt).
6. Position the inner ring inside the vehicle and turn clockwise to screw into the ventilator (takes about 3 full rotations).
7. Push the valve over the inner ring. This acts as the open/close valve.